In this section you will find all you need to know about your Butterfly Adhesive Bra, from maintaining it to how it works, how to measure and how to use
How It Works
The BUTTERFLY BRA works very differently from all other bras available, obviously I had to take into account the added weight of larger breasts, also to take into account how comfortable the bra had to be as well as how it was going to remain in place, so you the wearer got the most out of the bra with peace of mind that the bra was going to withstand your night out.
Firstly the internal support had to be made from a firm yet flexible material, then encased in softer material and the adhesive had to be strong enough to hold.
Not to reveal too much about the internal structure of the bra, the support runs along the chest directly underneath the breasts, the cup section of the support is of an oval shape to run along the underside of your breasts. To help maintain the shape, of your breasts, the support not only goes underneath but also to the front of the breasts, thus holding you in place.
The silicone adhesive is very strong, medical grade silicone adhesive, this adhesive – if maintained by following the instructions that are included in the packaging, will remain extremely sticky – as long as you follow the maintenance guidelines.
THERE IS NO OTHER ADHESIVE BRA THAT OFFERS WHAT THE BUTTERFLY ADHESIVE BRA OFFERS, THAT IS SPECIALLY DESIGNED FOR LARGE BREASTS – I USED MY OWN FRUSTRATIONS TO WORK OUT A WAY TO ENSURE I WAS NOT ONLY CREATING A GREAT PRODUCT BUT ONE THAT CAN BE REUSABLE AND SUITABLE FOR LARGE HEAVIER BREASTS.
How To Measure
It is a known fact that most women are wearing the wrong size bra, you could well think you are a D cup but when measured you are actually an F cup. This is because all bra makers and women are different.
To make this product easier for you to select the right size for you, instead of putting D/DD etc as the selection, I have an easier way of measuring for my product saving you from purchasing the wrong size.
You will need a fabric tape measure and to be wearing your current bra that fits you the most comfortably.
Step 1) Measure the distance from the centre of your chest (in between your breasts), around one of your breasts to the edge of your breast – just under your arm, where your breast changes to your side. If your breast measures between 22cm and 26cm then you buy a SMALL size, if you measure between 28cm and 32cm you buy the MEDIUM size and if you measure 32cm to 36cm you buy the LARGE sized bra.
Step 2) Measure the distance between your nipples, place the measuring tape on one nipple (whilst wearing your bra) and measure to your other nipple.
Below is a short video on how to measure in case I haven’t explained it correctly.
Every woman has a different build, so to ensure you get the right product, please also measure the distance between nipple to nipple, a petite frame distance is approximately 15cm, a medium frame is approximately 18 – 20 cm and a large frame is around 22cm.
PLEASE ENSURE YOU HAVE MEASURED YOURSELF FULLY BEFORE PURCHASING
How To Use
There are only 3 steps to attaching THE BUTTERFLY ADHESIVE BRA!
After you have removed the bra from the packaging, please retain the box and DO NOT throw the plastic covers for the silicone adhesive away, you will need these!
STEP 1 – Lean forward, so your breasts swing freely, ensure you tie your hair out of the way.
STEP 2 – Attach the top of each cup to just above your areola
STEP 3 – Stand back upright whilst cupping your breasts in the bra, affixing the side wings, so now you can adjust a breast at a time to get a comfortable fit.
YOU ARE READY TO GO!!
PLEASE ENSURE YOU ARE NOT ALLERGIC TO ANY MATERIALS USED IN THE BUTTERFLY ADHESIVE BRA, IF YOU ARE ALLERGIC TO ANY OF THE MATERIALS BELOW DO NOT USE THIS PRODUCT
MATERIALS USED ARE:-
*Surface = Nylon 80% & Spandex 20%
*Adhesive = 100% Silicone Adhesive
* Side wings = TPU with Silicone Adhesive
* Internal support materials = TPEE
How To Maintain Your Butterfly Bra
To ensure you get the maximum uses (approx 25) of your product, follow these 6 steps
Step 1 – Fill a sink with warm water and a small amount of mild laundry soap
Step 2 – Remove all plastic protectors and any debris from the adhesive
Step 3 – Submerge the bra 3 times only – empty sink and rinse all soap residue from the bra under the warm tap
Step 4 – Place bra face down on a clean surface and use a hairdryer to dry the adhesive, the heat also reactivates it
Step 5 – Replace all plastic protectors on ALL adhesive surfaces
Step 6 – Wrap bra in a clean towel and place, face up in a warm room to air dry
* NEVER put the bra in the washer or dryer – this is a hand wash product only, if you wash it in the machines and then dry it – YOU WILL DESTROY THE PRODUCT
If you follow these instructions, there is no reason why your adhesive bra won’t last a long time, failure to do this and you will be wasting your money, and no woman likes to waste money
Your order will be processed and delivered without undue delay, no later than 30 days after your order has been placed. Pre-orders will be processed and shipped no later then 30 days after the launch date.
Please allow for up to 7 working days for delivery following the dispatch of your order.
Cancellations, Returns and Refunds
All customers have the right to cancel their order under the Consumer Contracts (Information, Cancellation & Additional Charges) Regulations.
Your right to cancel an order for goods starts the moment you place your order and ends 14 days from the day you receive your goods. Due to the nature of the product, to receive a full refund, the product must be unused and in the correct packaging, failing this will mean that your refund is denied.
To meet the cancellation deadline, please notify us via email email@example.com, about cancelling the order before the cancellation period has expired and ensure package arrives at the head office before the 14 day period ends.
If you are in possession of the goods you are under the duty to retain them and take reasonable care of them. You must send the goods back to us to our contact address at your own cost (unless we delivered the item to you in error or the item is damaged or defective) as soon as possible once you have cancelled the order.
We reserve the right to make a charge not exceeding our direct costs of recovering the goods if you do not return the goods or return them at our expense.
Once you have notified us that you wish to cancel the order, any sum debited to us will be refunded to you as soon as possible.
You will not have any right to cancel an order for the supply of any of the following goods:
(a) medicinal products or services that are either dispensed on prescription or are available free under an NHS arrangement.
(b) a contract for passenger transport services – such as bus, rail or flight tickets.
(c) the supply of goods or services where prices are dependent upon fluctuations in the financial markets, which are beyond the control of the retailer.
(d) the supply of goods that are made to the customer’s specification or are clearly personalised.
(e) the supply of goods that are liable to deteriorate or expire rapidly – such as a delivery of fresh flowers or meat.
(f) the supply of newspapers, periodicals or magazines.
(g) the supply of accommodation, transport of goods, vehicle rental services, catering or services related to leisure activities if the contract provides for a specific date or period of performance – for example, hotel bookings, courier services, car hire, restaurant bookings and theatre tickets for specific dates.
In addition you will lose your right to cancel if you:
(a) unseal goods that are not suitable for return if they are unsealed, due to health protection or hygiene reasons.
(b) unseal audio, video recordings or computer software that were sealed at the time of delivery.
(c) combine goods with other goods after delivery so that they become inseparable.